Table C-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item

Sub-menu item

Sub-menu item

Values and Description

 

 

 

 

 

DHCP Renew

 

Displays if Config Method is set to DHCP and a

 

 

 

DHCP lease exists for the print server.

 

 

 

No (default): Print server does not request to renew

 

 

 

the DHCP lease.

 

 

 

Yes: Print server requests to renew the current DHCP

 

 

 

lease.

 

 

 

 

 

 

Manual Settings

Available if Config Method is set to Manual. You can

 

 

 

set the following from the printer control panel:

 

 

 

IP Address: Printer IP address.

 

 

 

Subnet Mask: Printer subnet mask.

 

 

 

Syslog Server: IP address of the syslog server used

 

 

 

to receive and log syslog messages.

 

 

 

Default Gateway: IP address of the gateway or router

 

 

 

used for communications with other networks.

 

 

 

Idle Timeout: Time, in seconds, after which an idle

 

 

 

TCP print data connection is closed.

 

 

 

 

 

 

Default IP

Default IP address to use if the print server is unable

 

 

 

to obtain an IP address from the network during a

 

 

 

forced TCP/IP reconfiguration. (For example, when

 

 

 

manually configured to use BootP or DHCP.)

 

 

 

Auto IP: Link-local IP address 169.254.x.x is set.

 

 

 

Legacy: 192.0.0.192 is set, consistent with older

 

 

 

HP Jetdirect devices.

 

 

 

 

 

 

Primary DNS

IP address (n.n.n.n) of a primary DNS server.

 

 

 

NOTE: Displays only if Manual configuration is a

 

 

 

higher priority than DHCP in the Config Precedence

 

 

 

table, when configured through the HP Embedded

 

 

 

Web Server.

 

 

 

 

 

 

Secondary DNS

IP address (n.n.n.n) of a secondary DNS server.

 

 

 

NOTE: Displays only if Manual configuration is a

 

 

 

higher priority than DHCP in the Config Precedence

 

 

 

table, when configured through the HP Embedded

 

 

 

Web Server.

 

 

 

 

 

IPv6 Settings

Enable

IPv6 operation on the print server.

 

 

 

Off: Disable IPv6.

 

 

 

On (default): Enable IPv6.

 

 

 

 

 

 

Address

Manually configure an IPv6 address.

 

 

 

Manual Settings: Manually configure a TCP/ IPv6

 

 

 

address.

 

 

 

Enable: Enable (On) or disable (Off) manual

 

 

 

configuration.

 

 

 

Address: IPv6 node address (32 hexadecimal digits).

 

 

 

 

182 Appendix C HP Jetdirect control panel menus (V.45.xx.nn.xx)

ENWW