Table 3-3Telnet Commands and Parameters (continued)

ipx-sapinterval

Time in seconds that the HP Jetdirect print server waits between service advertising

 

protocol (SAP) broadcasts on the network. Set from 1 to 3600 seconds.

 

0: Disable.

 

60 (default): Enable SAP broadcasts.

 

 

ipx-mode

(Read-only parameter.) NetWare mode configured on the print server (RPRINTER or

 

QSERVER).

 

 

ipx-nds-tree

NDS tree name for the print server. Enter up to 31 alphanumeric characters.

 

 

ipx-nds-context

NDS context for the HP Jetdirect print server. Enter up to 256 alphanumeric characters.

 

 

ipx-job-poll

Specifies the time interval in seconds that the HP Jetdirect print server waits to check for

 

print jobs in a print queue. Set from 1 to 255 seconds.

 

0: Disable.

 

2 (default): Enable.

 

 

pjl-banner

Print an IPX banner page through PJL.

(ipx-banner)

0: Disable.

 

1 (default): Enable banner pages.

 

 

pjl-eoj

IPX end-of-job notification through PJL.

(ipx-eoj)

0: Disable.

 

1 (default): Enable.

 

 

pjl-toner-low

IPX toner-low notification through PJL.

(ipx-toner-low)

0: Disable.

 

1 (default): Enable.

 

 

AppleTalk

 

 

 

appletalk

Use AppleTalk (EtherTalk) protocol operation on the print server.

 

0: Disable.

 

1 (default): Enable.

 

NOTE: On HP Jetdirect 640n print servers, all network protocols except TCP/IP are

 

disabled by factory default.

 

 

Name

(Read-only parameter.) Name of the printer on the AppleTalk network. A number after

 

the name indicates that this is the Nth instance of the name.

 

 

Print Type

(Read-only parameter.) AppleTalk network printer type reported by the HP Jetdirect print

 

server. Up to three print types can be reported.

 

 

Zone

(Read-only parameter.) Name of the AppleTalk network zone on which the printer is

 

located.

 

 

Phase

(Read-only parameter.) AppleTalk phase 2 (P2) is pre-configured on the HP Jetdirect

 

print server.

 

 

56 Chapter 3 TCP/IP configuration

ENWW