Novell/NetWare parameters

Information in this section of the HP Jetdirect configuration page is described in Table 8-10 Novell/ NetWare configuration information on page 151. For error messages, see Table 8-13 Error messages on page 153.

Table 8-10 Novell/NetWare configuration information

Message

Description

 

 

STATUS

Current Novell NetWare configuration status.

 

READY Print server is awaiting data.

 

DISABLED Manually disabled.

 

INITIALIZING Registering the node address or name. Additional status messages

 

might be displayed.

 

An error code and message is displayed if the print server is not ready. For more

 

information, see Table 8-13 Error messages on page 153.

 

 

NODE NAME

Queue Server Mode Print server name, which must match a valid print server on the

 

appropriate NetWare file server. The default name is NPIXXXXXX, where XXXXXX is

 

the last six digits of the LAN hardware (MAC) address.

 

Remote Printer Mode Network printer name. The default name is NPIXXXXXX.

 

 

NETWARE MODE

Mode used by the HP Jetdirect print server.

 

QUEUE SERVER Receives data directly from the queue.

 

REMOTE PRINTER Print server emulates a Novell NetWare remote printer. (The

 

printer number normally follows this parameter.)

 

If the printer is not configured, this field displays QUEUE SERVER.

 

 

NDS TREE NAME

Name of the Novell Directory Services (NDS) tree for this printer. NDS is a database

 

of objects on a NetWare network organized in a hierarchical tree structure.

 

Not Specified (or blank) NDS is disabled.

 

 

NDS CONTEXT

Fully qualified NDS name where the HP Jetdirect print server object resides in the

 

NDS tree. For example:

 

CN=lj_pserver.OU=support.OU=mycity.OU=mycompany

 

Not Specified (or blank) NDS is disabled.

 

 

ATTACHED SERVER

HP Jetdirect discovery method [NSQ] (Nearest Service Query) or [GSQ] (General

 

Service Query) and the name of the proxy file server used to locate the configured

 

bindery servers.

 

Not Specified (or blank) A NetWare server is not configured.

 

 

SAP INTERVAL

Time interval in seconds that the print server waits between SAP broadcasts on the

 

network. The default is 60 seconds.

 

 

AppleTalk protocol information

Information in this section of the HP Jetdirect configuration page (Ethernet only) is described in Table 8-11 AppleTalk configuration information on page 152. For error messages, see Table 8-13 Error messages on page 153.

ENWW

HP Jetdirect configuration page 151