Figure 3-1Example: Using the Menu Interface

Main Menu

-------------------------------

1.General Menu

2.TCP/IP Menu...

3.SNMP Menu...

4.IPX/SPX Menu

5.AppleTalk Menu

6.DLC/LLC Menu

7.Other Settings

8.Support Settings

9.Wireless Settings ?. Help

e. Exit Menu

0. Exit Telnet Enter Selection => 2

TCP/IP Menu

-------------------------------

1.TCP/IP - Main Settings

2.TCP/IP - Print Options

3.TCP/IP - Raw Print Ports

4.TCP/IP - Access Control

5.TCP/IP - Other Settings

6.TCP/IP - Diagnostics

0.Return to Main Menu

Enter Selection => 1

TCP/IP - Main Settings

-------------------------------

Host Name

: printer1

IP Config Method

: USER SPECIFIED

IP Address

: 192.168.45.39

Subnet Mask

: 255.255.0.0

Default Gateway

: 192.168.40.1

Config Server

: 192.168.2.21

TFTP Server

: 192.168.2.21

TFTP File Name

: hpnp/print.cfg

Domain Name

: Not Specified

DNS Server

: Not Specified

Pri WINS Server

: Not Specified

Sec WINS Server

: Not Specified

SMTP Mail Server

: Not Specified

Would you like to change any of the settings? (Y/[N]):Y

To edit these parameters, enter Y. Use the Backspace key to edit the parameters. Changes are not saved until you save them when you exit the session.

Use Telnet to remove an IP address

To erase the IP address during a Telnet session, use the following command line entries:

1.Type cold-reset, then press Enter.

2.Type quit, then press Enter to exit Telnet.

3.Turn the print server off and then on.

60 Chapter 3 TCP/IP configuration

ENWW