Table 3-3Telnet Commands and Parameters (continued)

status-page-lang

Printer job language (PJL) that the print server uses to send the HP Jetdirect

 

configuration/status page to the printer.

 

● Auto (default): PJL is auto-detected when the print server is turned on or after a

 

cold reset.

 

● PCL: HP Printer Control Language

 

● ASCII: Standard ASCII characters

 

● HPGL2: HP graphics language (v2)

 

● PS: Postscript language

 

 

Support

 

 

 

Web JetAdmin URL

(Read-only parameter.) If HP Web Jetadmin discovers this device, the URL to access

 

HP Web Jetadmin is specified.

 

 

Web JetAdmin Name

(Read-only parameter.) If HP Web Jetadmin discovers this device, the name of the

 

HP Web Jetadmin host is specified (if known).

 

 

support-contact

Name of a person to contact for support of this device.

 

 

support-number

Phone or extension number to call for support of this device.

 

 

support-url

Web URL address for product information on this device over the Internet or an intranet.

 

 

tech-support-url

Web URL address for technical support over the Internet or an intranet.

 

 

Menu Interface

An optional Menu interface is displayed when you type the menu command during a Telnet session with the HP Jetdirect print server. The Menu interface provides structured menu lists for easy access to configuration parameters.

Figure 3-1 Example: Using the Menu Interface on page 60 illustrates the Menu interface, using the TCP/IP menus as an example.

●From the Main Menu screen, select and enter a menu number. If there are submenus, select and enter a submenu number.

●To change a setting, enter Y (for Yes) when prompted.

Edit the setting, using the Backspace key. If you enter an unrecognized value, the correct entry options are displayed.

NOTE: Changes are not saved on the HP Jetdirect print server until you exit a menu and choose to save your changes.

ENWW

IPv4 configuration 59