Other Settings

Use this tab to provide access to a variety of management and printing configuration options. The following tabs are discussed:

●Misc. Settings on page 85 Enable miscellaneous advanced protocols and functions

●Firmware Upgrade on page 87 Update your HP Jetdirect print server with new features and enhancements

●LPD Queues on page 87 Set up print queues used in printing with line printer daemon (LPD) printing services

●Support Info on page 90 Set up the Support link located under Other Links in the left margin

●Refresh Rate on page 90 Set the time interval (in seconds) for HP Embedded Web Server diagnostic page updates

Misc. Settings

Use the Misc. Settings tab to set a variety of advanced protocols and features, as described in Table 4-13 Miscellaneous Settings on page 85.

Table 4-13Miscellaneous Settings

Item

Description

 

 

SLP Config

Enable SLP, which is used by certain client application software to automatically

 

discover and identify the HP Jetdirect print server.

 

If SLP uses multicast protocols, you must enable Multicast IPv4.

 

 

Telnet Config

Use Telnet to access to HP Jetdirect configuration parameters. For more information,

 

see TCP/IP configuration on page 15.

 

 

Bonjour

Use Bonjour services (formerly listed as Multicast Domain Name System [mDNS]

 

services). Bonjour is typically used for IP address and name resolution (through UDP

 

port 5353) where a conventional DNS server is not used.

 

For Bonjour operation, you must enable Multicast IPv4.

 

 

Multicast IPv4

Use the receipt and transmission of IP version 4 multicast packets by the print server.

 

NOTE: If disabled, other protocols that use multicast protocols, such as Bonjour and

 

SLP, might also be disabled.

 

 

9100 Config

Use port 9100 services. This is an HP-proprietary raw TCP/IP port on the HP Jetdirect

 

print server and is the default port for printing. It is accessed by HP software, such as

 

the HP Standard Port.

 

 

FTP Printing

Use FTP services available on the HP Jetdirect print server for printing. For more

 

information, see FTP printing on page 175.

 

 

LPD Printing

Use LPD services on the HP Jetdirect print server. LPD provides line printer spooling

 

services for TCP/IP systems. For more information, see LPD printing on page 165.

 

 

IPP Printing

Use IPP on the HP Jetdirect print server. If the printer is properly connected and

 

accessible, IPP allows printing to this device over the Internet (or intranet). A properly

 

configured IPP client system is also required. For information on IPP client software, see

 

HP software solutions summary on page 7.

 

 

HP XML Services

Allow access by HP Web service applications to XML-based data on the HP Jetdirect

 

print server.

 

 

ENWW

Networking tab 85