Table
Message | Description |
|
|
STATUS | Current TCP/IPv4 status. |
| READY Print server is awaiting data over TCP/IP. |
| DISABLED TCP/IP is manually disabled. |
| INITIALIZING Print server is searching for the BOOTP server, or trying to get the |
| configuration file through TFTP. An additional status message can also be displayed. |
| An error code and message is displayed if the print server is not ready. For more |
| information, see Table |
|
|
IP ADDRESS | IPv4 address assigned to the HP Jetdirect print server. This is a required entry for |
| operation of the print server on a TCP/IP network. During initialization, a temporary |
| value 0.0.0.0 is displayed. After two minutes, a default IP address 169.254/16 or |
| 192.0.0.192 is assigned. |
| Not Specified IP address is not assigned or the value is zero. |
|
|
SUBNET MASK | IPv4 subnet mask configured on the HP Jetdirect print server. During initialization, a |
| temporary value 0.0.0.0 is displayed. Depending on configuration parameters, the |
| print server can automatically assign a usable default value. |
| Not Specified Subnet mask is not configured. |
|
|
DEFAULT GATEWAY | IPv4 address of the gateway used when sending packets off the local network. Only |
| one default gateway can be configured. During initialization, a temporary value |
| 0.0.0.0 is displayed. If not provided, the IP address of the HP Jetdirect print server is |
| used. |
| Not Specified Default gateway is not configured. |
|
|
CONFIG BY: | Indicates how the HP Jetdirect print server obtained its IPv4 configuration: |
| BOOTP Automatic configuration through a BOOTP server. |
| BOOTP/TFTP Automatic configuration through a BOOTP server and TFTP |
| configuration file. |
| DHCP Automatic configuration through a DHCP server. |
| DHCP/TFTP Automatic configuration through a DHCP server and TFTP configuration |
| file. |
| RARP Automatic configuration through the RARP. |
| USER SPECIFIED Manual configuration through Telnet, the printer's control panel, |
| HP Web Jetadmin, HP Embedded Web Server, or other method. |
| DEFAULT IP Default IP address was assigned. This address might not be a valid |
| address for your network. |
| AUTO IP |
| local network, this address should be valid. |
| NOT CONFIGURED Not configured with IP parameters. Verify that TCP/IP is |
| enabled, or check for error status. |
|
|
148 Chapter 8 HP Jetdirect configuration pages | ENWW |