TCP/IP protocol information
Information in this section of the HP Jetdirect configuration page is described in the following table. For general TCP/IP configuration parameters, see Table
on page 147. For IPv4 parameters, see Table
Table
Message | Description |
|
|
IPv4 | Status of IPv4 and IPv6 protocols on the print server: |
and | Enabled Protocol is active. |
IPv6 | Disabled Protocol is inactive. |
|
|
HOST NAME | Host name configured on the print server. It might be truncated. |
| Not Specified Host name not specified in a BOOTP response or TFTP configuration |
| file. |
| NPIxxxxxx Default name is NPIxxxxxx, where xxxxxx represents the last six digits of |
| the LAN hardware (MAC) address. |
|
|
IPV4 DOMAIN NAME | DNS name of the IPv4 domain in which the HP Jetdirect print server resides (for |
| example, support.company.com). This is not the fully qualified DNS name (for |
| example, printer1.support.company.com) because the host printer name is not |
| included. |
| Not Specified Domain name not configured on the print server. |
|
|
IPV6 DOMAIN NAME | DNS name of the IPv6 domain in which the HP Jetdirect print server resides (for |
| example, support.company.com). This is not the fully qualified DNS name (for |
| example, printer1.support.company.com) because the host printer name is not |
| included. |
| Not Specified Domain name not configured on the print server. |
|
|
PRIMARY DNS SERVER | IPv4 address of the DNS server. |
| Not Specified Primary DNS server not configured on the print server. |
|
|
SECONDARY DNS SERVER | IPv4 address of the DNS server. |
| Not Specified Secondary DNS server not configured on the print server. |
|
|
DNS (IPV6) | IPv6 address of one or more DNS servers. |
| Not Specified IPv6 DNS server not configured on the print server. |
|
|
WINS SERVER | IP address of the WINS server. |
| Not Specified WINS server's IP address not detected or configured. |
|
|
IDLE TIMEOUT | Timeout value expressed in seconds after which the print server closes an idle TCP |
| print data connection. Values are integers between 0 and 3600. A value of zero turns |
| off the timeout mechanism. The default value is 270 seconds. |
|
|
IPv4 section
Items displayed under the IPv4 section of the configuration page are discussed in the following table.
ENWW | HP Jetdirect configuration page 147 |