Table
Item |
| Limit |
|
|
|
◦ | FE81:: to FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF for local addresses, |
|
| :: to FE7F:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF for remote addresses |
|
◦ | FE81:: to FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF for both local and remote |
|
| addresses |
|
● All Broadcast/Multicast Addresses Results in four (4) address template rules: |
| |
◦ | 224.0.0.0 to 239.255.255.255 IPv4 local addresses and all IPv4 remote addresses |
|
◦ | A single IPv4 local address, and all IPv4 remote addresses |
|
◦ | 255.255.255.255 local address, and all IPv4 remote addresses |
|
◦ | FF00:: / 8 local IPv6 addresses, and all IPv6 remote addresses |
|
NOTE: To avoid multiple rules for these predefined address templates, you can create custom |
| |
address templates. |
| |
|
| |
Maximum number of | 8 | |
|
| |
Maximum number of services you can add to a | 64 | |
NOTE: The predefined All Services template is not subject to this limitation and includes all |
| |
services supported by the print server. |
| |
|
| |
Maximum number of services you can add to the policy. | 64 | |
For example, if a |
| |
template you can use. |
| |
|
| |
Maximum number of service templates in the policy. | 10 | |
|
| |
Maximum number of | 10 | |
|
| |
Maximum number of IPsec templates in the IPsec policy. | 5 | |
|
| |
Maximum number of | 5 | |
|
|
|
Step 1: Specify Address Template
When you select Add Rules, the available address templates are listed in the Address Templates field by name. Select a predefined template, or click New to create a custom template using the Create Address Template page, described below.
To view or delete a template in the list, select it and click View or Delete (you cannot delete some predefined templates).
After selecting an address template, click Next.
Create Address Template
Items on the Create Address Template page are described in the following table:
110 Chapter 5 IPsec/Firewall configuration (V.45.xx.nn.xx) | ENWW |