1-24

Replacing an Existing CD-ROM Drive With a CD-Writer Plus

7B. Write down the CD-Writer Plus’ serial number in the space below. The serial number is on the main label on the top of the drive.

Serial

number:

Drive’s serial number

8B. Read the Install Recommendation you printed earlier (see page 1-21). The Install Recommendation tells you whether the jumper on the CD-Writer Plus should be set as Master or Slave for your computer.

9B. Find the pairs of pins labeled Master, Slave, and Cable Select on the back of your CD-Writer Plus. Notice that one pair of pins has a small plastic cap or jumper. This jumper can be pulled off using your fingers, tweezers, or needlenose pliers, and placed on a different pair of pins to change the setting.