1-22

Replacing an Existing CD-ROM Drive With a CD-Writer Plus

Installing the Hardware

CAUTION: The discharge of static electricity can damage electronic circuitry. You can avoid static discharge by touching a grounded metal object such as your computer’s case before and during installation of hardware inside your computer or by wearing a grounding strap connected to ground.

1B. REMOVE the CD labeled Software Disc 1 from your CD-ROM

drive.

2B. After getting the Install Recommendation (see the previous section) you will be prompted to shut down Windows. Click the Shutdown button and wait until it is safe to turn off your computer. Proceed to turn OFF your computer, monitor, and other devices.

3B. Unplug the power cords from the wall outlet or from the power strip, if you use one.

4B. Remove the cover from your computer.

CAUTION: Be careful of any sharp edges that may be present inside your computer.

Computer OFF

See your computer’s

manual if you need help

removing the cover.

Page 31
Image 31
HP C4392-90100 manual Installing the Hardware