Replacing an Existing CD-ROM Drive With a CD-Writer Plus

1-23

5B. Remove the CD-ROM drive from your computer. To do this, remove all screws holding the CD-ROM drive in the bay and unplug all cables from the back of the CD-ROM drive. As you unplug them, lay the cables aside so they will be easy to find, since you will be plugging them into the CD- Writer Plus drive later on. Then pull the drive out of the drive bay.

NOTE: You will not need to use the data cable that came with your CD-Writer Plus drive. If you already have an audio cable to connect the drive to the sound card, you will not need the one that came with the CD-Writer Plus.

6B. Look at the sides of the CD-ROM drive you removed. If it has rails or mounting brackets attached to the sides, remove them from the CD- ROM drive and attach them to the CD-Writer Plus.

Writer Plus

Chapter 1:

and Software

Installing CD-

Page 32
Image 32
HP C4392-90100 manual Software Installing CD