HP C4392-90100 manual Software Installing CD

Models: C4392-90100

1 139
Download 139 pages 15.17 Kb
Page 26
Image 26

Installing a CD-Writer Plus in an Empty Drive Bay

1-17

Identify the audio connectors on the sound board.

The audio connectors have four prongs and are often on the outer edge of the sound board. On many sound boards the connectors for the audio cable are labeled CD IN.

Select the connector on the audio cable that fits your sound board.

The audio cable has two connectors in order to work with most sound boards. Try to match one of them to a connector on your sound board.

The audio cable may connect horizontally or vertically to the sound board. The connectors only fit one way. If a connector doesn’t fit, try turning it around.

Use only one of the two connectors on this end of the audio cable. Simply leave the connector you don’t use unattached.

Some sound boards have more than one audio cable connector. If when you turn your computer back on you get no sound, try using a different connector on your sound board.

NOTE: The audio cable provided with CD-Writer Plus will work with most sound boards. If you need to purchase a different audio cable, contact your local computer hardware vendor. Be sure to identify the type of sound board you have and specify that you require an MPC-2 connector at the drive.

Writer Plus

Chapter 1:

and Software

Installing CD-

 

 

Page 26
Image 26
HP C4392-90100 manual Software Installing CD