Replacing an Existing |
■Identify the audio connectors on the sound board.
The audio connectors have four prongs and are often on the outer edge of the sound board. On many sound boards the connectors for the audio cable are labeled CD IN.
■Select the connector on the audio cable that fits your sound board.
The audio cable has two connectors in order to work with most sound boards. Try to match one of them to a connector on your sound board.
The audio cable may connect horizontally or vertically to the sound board. The connectors only fit one way. If a connector doesn’t fit, try turning it around.
Use only one of the two connectors on this end of the audio cable. Simply leave the connector you don’t use unattached.
■Some sound boards have more than one audio cable connector. If when you turn your computer back on you get no sound, try using a different connector on your sound board.
NOTE: The audio cable provided with
Writer Plus | Chapter 1: |
and Software | Installing CD- |
|
|