Installing a CD-Writer Plus in an Empty Drive Bay

1-7

6A. Write down the CD-Writer Plus’ serial number in the space below. The serial number is on the main label on the top of the drive.

Serialnumber:

Drive’s serial number

7A. Read the Install Recommendation you printed earlier (see page 1-4). The Install Recommendation tells you whether the jumper on the CD-Writer Plus should be set as Master or Slave for your computer.

8A. Find the pairs of pins labeled Master, Slave, and Cable Select on the back of the CD-Writer Plus. Notice that one pair of pins has a small plastic cap or jumper. This jumper can be pulled off using your fingers, tweezers, or needlenose pliers, and placed on a different pair of pins to change the setting.

Plus Writer

1: Chapter

Software and

-CD Installing