HP Deskjet 6600 series printer

5. Tilt the Small Paper Tray forward and open the lower door of the accessory.

1.Tilt the Small Paper Tray

2.Open the lower door

6.Remove any paper that is inside the accessory.

7.Close the accessory, and then secure the back lever to close the accessory.

8.Re-attach the accessory to the printer.

Option for two-sided printing cannot be selected

The printer driver cannot sense the duplexer until a print job is sent to the printer. Print a single sided document, and then print the two-sided document. The option for using the duplexer will appear in the printer software.

If the option for the duplexer still does not appear, then verify that the following conditions exist:

The duplexer is attached to the printer.

The duplexer is enabled in the printer software.

The media type and size selected on the Paper/Quality tab are supported by the duplexer.

160

Page 160
Image 160
HP Networking 6600 manual Option for two-sided printing cannot be selected