HP Deskjet 6600 series printer

Cannot open the printer's embedded Web server (EWS)

Verify the following:

You are not using a phone cord to connect the printer to the network

The Ethernet cable is securely connected to the printer.

The network hub, switch, or router is on and working properly.

The computer that you are using is connected to the network.

If you still cannot access the printer's EWS, then follow these steps:

1.Print an HP Report page.

2.Find the printer's IP address.

3.Launch your Internet browser.

Use Microsoft Internet Explorer 5.0 or higher or Netscape 4.75 or higher.

4.Enter the printer's IP address in the address box, then press Enter.

A personal software firewall is blocking communication between the printer and the computer

The personal software firewall is a security program that protects a computer from intrusion. However, the personal firewall might block communication between the computer and the printer.

If you cannot communicate with the printer, try disabling the personal firewall. If you are still unable to communicate with the printer, then re-enable the firewall.

If disabling the firewall allows you to communicate with the printer, you might want to assign the printer a static IP address and then re-enable the firewall. To assign the printer a static IP address, see the reference guide that came with the printer.

11.2 Printer is not printing

Verify the following

The printer is connected to the power source.

The cable connections are secure.

The printer is turned on.

The print cartridges are correctly installed.

The paper or other media is correctly loaded in the In tray.

The printer cover is closed.

The rear access door or optional duplexer is attached.

121

Page 121
Image 121
HP Networking 6600 manual Printer is not printing, Cannot open the printers embedded Web server EWS, Verify the following