HP Deskjet 6600 series printer

Note: Do not press the buttons on either side of the duplexer when installing it in the printer. Use the buttons only when removing the duplexer from the printer.

12.1.2 Enabling the duplexer

Follow these step to enable the duplexer:

1.Open the printer Toolbox.

2.Click the Configuration tab.

3.Click Automatic Two-Sided Printing Module or Auto Two-Sided Print Accessory with small paper tray, and then click Apply.

4.Click OK in the confirmation box that appears.

5.Click the X in the upper-right corner to close the screen.

Note: After the duplexer is enabled, it is not necessary to re-enable it every time you print.

12.1.3 Printing a booklet automatically

To print a booklet automatically, one of the following accessories must be attached to the printer:

Automatic Two-Sided Printing Accessory

Auto Two-Sided Print Accessory with Small Paper Tray

The two-sided printing accessories only support certain paper types. For a list of supported paper types, see the specifications for either the Automatic Two-Sided Printing Accessory or the Auto Two-Sided Print Accessory with Small Paper Tray.

If a two-sided printing accessory is not attached to the printer or you are printing on an unsupported paper type, use manual two-sided printing.

Guidelines

Do not exceed the In-tray capacity: up to 150 sheets.

140