HP Deskjet 6600 series printer

Configuring the printer to feed paper from the accessory

Follow these steps to configure the printer to feed paper from the accessory:

1.Press and hold down the Report Page button.

2.While holding down the Report Page button, press the Cancel button twice.

3.Release the Report Page button.

After configuring the printer to feed paper from the accessory, load the photo paper into the accessory and then follow the PictBridge printing instructions.

Note: For printing PictBridge photos, the printer only needs to be configured to feed paper from the Auto Two-Sided Print Accessory with Small Paper Tray once. After being configured, the printer will attempt to print from the accessory until the printer is configured to use the In tray for PictBridge photos.

Re-configuring the printer to feed paper from the In tray

Follow these steps to re-configure the printer to feed paper from the In tray for PictBridge photos:

1.Press and hold down the Report Page button.

2.While holding down the Report Page button, press the Cancel button twice, and then press the Resume button once.

3.Release the Report Page button.

37

Page 37
Image 37
HP Networking 6600 manual Configuring the printer to feed paper from the accessory