![](/images/new-backgrounds/1285022/285022211x1.webp)
3.Create a package control script.
# cmmakepkg -s pkgname.cntl
Customize the control script as appropriate to your application using the guidelines in the Managing Serviceguard user’s guide. Standard Serviceguard package customizations include modifying the VG, LV, FS, IP, SUBNET, SERVICE_NAME, SERVICE_CMD, and SERVICE_RESTART parameters. Set LV_UMOUNT_COUNT to 1 or greater.
NOTE: Some of the control script variables, such as VG and LV, on the target disk site must be the same as on the source disk site. Some of the control script variables, such as, FS, SERVICE_NAME, SERVICE_CMD and SERVICE_RESTART are probably the same as on the source disk site. Some of the control script variables, such as IP and SUBNET, on the target disk site are probably different from those on the source disk site. Ensure that you review all the variables accordingly.
4.Add
5.Copy the environment file template /opt/cmcluster/toolkit/SGCA/ xpca.env to the package directory, naming it pkgname_xpca.
# cp /opt/cmcluster/toolkit/SGCA/xpca.env \ /etc/cmcluster/pkgname/pkgname_xpca.env
6.Edit the environment file <pkgname>_xpca.env as follows:
a.If necessary, add the path where the Raid Manager software binaries have been installed to the PATH environment variable. If the software is in the usual location, /usr/bin, you can just uncomment the line in the script.
b.Uncomment the behavioral configuration environment variables starting with AUTO. HP recommends that you retain the default values of these variables unless you have a specific business requirement to change them. See “Package attributes” (page 88) for explanation of these variables.
c.Uncomment the PKGDIR variable and set it to the full path name of the directory where the control script has been placed. This directory, which is used for status data files, must be unique for every package. For Example, set PKGDIR to/etc/cmcluster/package_name, removing any quotes around the file names.
d.Uncomment the DEVICE_GROUP variable and set it to this package’s Raid Manager device group name, as specified in the Raid Manager configuration file.
e.Uncomment the HORCMPERM variable and use the default value MGRNOINST if Raid Manager protection facility is not used or disabled. If Raid Manager protection facility is enabled set it to the name of the HORCM permission file.
f.Uncomment the HORCMINST variable and set it to the Raid Manager instance name used by Metrocluster/Continuous Access.
g.Uncomment the FENCE variable and set it to either ASYNC, NEVER, or DATA according to your business requirements or special Metrocluster requirements. This variable is used to compare with the actual fence level returned by the array.
h.If using asynchronous data replication, set the HORCTIMEOUT variable to a value greater than the side file timeout value configured with the Service Processor (SVP), but less than the RUN_SCRIPT_TIMEOUT set in the package configuration file. The default setting is the side file timeout value + 60 seconds.
i.Uncomment the CLUSTER_TYPE variable and set it to continental.
7.Distribute Metrocluster/Continuous Access configuration, environment and control script files to other nodes in the cluster by using ftp, rcp or scp:
# rcp
See the example script Samples/ftpit to see how to
106 Legacy packages