
C Configuration file parameters for Continentalclusters
This appendix lists all Continentalclusters configuration file variables.
CLUSTER_ALARM [Minutes] | This is a time interval, in minutes and/or seconds, after |
MINUTES [Seconds] SECONDS | which the notifications defined in the associated |
| NOTIFICATION parameters are sent and failover to the |
| Recovery Cluster using the cmrecovercl command is |
| enabled. This number must be a positive integer. Minimum |
| is 30 seconds, maximum is 3600 seconds or 60 minutes |
| (one hour). |
CLUSTER_ALERT [Minutes] | This is a time interval, in minutes and/or seconds, after |
MINUTES [Seconds] SECONDS | which the notifications defined in the associated |
| NOTIFICATION parameters are sent. Failover to the |
| Recovery Cluster using the cmrecovercl command is not |
| enabled at this time. This number must be a positive integer. |
| Minimum is 30 seconds, maximum is 3600 seconds or 60 |
| minutes (one hour). |
CLUSTER_DOMAIN domainname | This is the domain of the nodes in the previously specified |
| cluster. This domain is appended to the NODE_NAME to |
| provide a full system address across the WAN. |
CLUSTER_EVENT Clustername/Status
This is a cluster name associated with one of the following changes of status:
•up - the cluster is up and running.
•unreachable - the cluster is unreachable.
•down - the cluster is down, but nodes are responding.
•error - an error is detected.
The maximum length is 47 characters.
When the MONITORING_CLUSTER detects a change in status, one or more notifications are sent, as defined by the NOTIFICATION parameter, at time intervals defined by the CLUSTER_ALERT and CLUSTER_ALARM parameters.
CLUSTER_NAME clustername The name of a member cluster within the Continentalclusters. It must be the same name that is defined in the Serviceguard cluster configuration ASCII file. Maximum size is 31 bytes.
All the nodes in the cluster must be listed after this variable using the NODE_NAME variable.
A MONITOR_PACKAGE_NAME and MONITOR_INTERVAL must also be associated with every CLUSTER_NAME.
CONTINENTAL_CLUSTER_NAME name
The name of Continentalclusters managed by the Continentalclusters product. Maximum size is 31 bytes. This name cannot be changed after the configuration is applied. You must first delete the existing configuration if you want to choose a different name.
DATA_RECEIVER_PACKAGE clustername/packagename
This variable is only used if the data replication is carried out by a separate software application that must be kept highly available. If the replication software uses a receiver process, you include this variable in the configuration file. Maximum size is 80 characters.
82 Configuration file parameters for Continentalclusters