vg ccvg
fs_name /dev/ccvg/lvol1
fs_directory /opt/cmconcl/statedir fs_mount_opt
fs_fsck_opt "" fs_type "vxfs"
For more information about DR Rehearsal feature, see “Performing Disaster Recovery rehearsal in Continentalclusters” (page 39).
4.Specify a name for the ccmonpkg log file using script_log_file parameter. script_log_file /etc/cmcluster/ccmonpkg/ccmonpkg.log
5.Validate the package configuration file.
#cmcheckconf –P ccmonpkg.conf
6.Apply the package configuration.
#cmapplyconf –P ccmonpkg.conf
Creating a Continentalclusters configuration
Continentalclusters configuration is created using a template configuration file. This template configuration file can be produced using the cmqueryconcl command.
First, on one cluster, generate an ASCII configuration template file using the cmqueryconcl command. The recommended name and location for this file is/etc/cmcluster/ cmconcl.config. (If preferred, choose a different name.)
For example,
#cd /etc/cmcluster
#cmqueryconcl -C cmconcl.config
This file has three editable sections:
•Cluster information
•Recovery groups
•Monitoring definitions
Cluster information
Configure the following parameters:
Parameter | Value | Mandatory or Optional |
CONTINENTAL_CLUSTER_NAME | Any valid string. | Mandatory. |
For Example |
|
|
CONTINENTAL_CLUSTER_NAME ccluster1 |
| |
CONTINENTAL_CLUSTER_STATE_DIR | Full path to the directory on the shared | Optional: Used only when if the |
| volume. | maintenance mode feature is required. |
For Example
CONTINENTAL_CLUSTER_STATE_DIR /opt/cmconcl/statedir
CLUSTER_NAME | The name of the Serviceguard cluster |
| that is a part of the Continentalclusters. |
NODE_NAME | The name of the node that is a part of |
| the Serviceguard cluster defined in the |
| CLUSTER_NAME parameter. |
Mandatory.
Mandatory: Multiple nodes must have separate NODE_NAME entries.
22 Building the Continentalclusters configuration
