HP Serviceguard Metrocluster manual Package Status State Pkgswitch Node

INTERFACE		STATUS		PATH		NAME
PRIMARY			up			4.1		lan0
PRIMARY			up			56.1		lan1
PACKAGE	STATUS		STATE		PKG_SWITCH		NODE
ccmonpkg		up		running		enabled		nynode2
Script_Parameters:
ITEM	NAME			STATUS	MAX_RESTARTS		RESTARTS
Service		ccmonpkg.srv		up		20		0
Node_Switching_Parameters:
NODE_TYPE		STATUS		SWITCHING		NAME
Primary		up			enabled			nynode2 (current)
Alternate		up			enabled		nynode1
UNOWNED Packages:
PACKAGE		STATUS		STATE		PKG_SWITCH		NODE
salespkg_bak		down		unowned

Policy_Parameters:

POLICY_NAME CONFIGURED_VALUE

Failover unknown

Failback unknown

Script_Parameters:
ITEM	STATUS	NODE_NAME	NAME
Subnet	unknown	nynode1	195.14.171.0
Subnet	unknown	nynode2	195.14.171.0

Node_Switching_Parameters:
NODE_TYPE	STATUS	SWITCHING	NAME
Primary	down		nynode1
Alternate	down		nynode2

Use the ps command to verify the status of the Continentalclusters monitor daemons cmclsentryd which must be running on the cluster node where the monitor package is running.

Notes on Packages in Continentalclusters

Packages have different behavior in Continentalclusters than in a normal Serviceguard environment. There are specific differences in

•Startup and Switching Characteristics

•Network Attributes

From Continentalclusters version A.0.08.00 and above, you can configure the following package types in a recovery group:

•Failover

•Oracle RAC Multi-node packages

•Complex workloads using SADTA

For details, see “Configuring complex workloads in a Continentalclusters environment using SADTA” (page 43).

In the case of a multi-node package, a recovery process recovers all instances of the package in a recovery cluster.

56 Administering Continentalclusters