Parameter | Value | Mandatory or Optional |
CLUSTER_DOMAIN | The DNS domain of the nodes defined | Mandatory. |
| above. |
|
MONITOR_PACKAGE_NAME | The name of the monitoring package, | This parameter is required only when |
| usually ccmonpkg. | the cluster specified in CLUSTER_NAME |
|
| acts as a the recovery cluster. |
MONITOR_INTERVAL | The amount of time between two |
| consecutive monitoring operations. |
For Example:
CLUSTER_NAME recovery_cluster
CLUSTER_DOMAIN myorg1.myorg.com
NODE_NAME recovery_node1
NODE_NAME recovery_node2
MONITOR_PACKAGE_NAME ccmonpkg
MONITOR_INTERVAL 60 SECONDS
CLUSTER_NAME primary_cluster
CLUSTER_DOMAIN myorg1.myorg.com
NODE_NAME primary_node1
NODE_NAME primary_node2
This parameter is required only when the cluster specified in CLUSTER_NAME acts as a the recovery cluster.
Recovery groups
In the Recovery groups, the following parameters are available:
Parameter | Value | Mandatory or Optional |
RECOVERY_GROUP_NAME | Any string. | Mandatory. |
PRIMARY_PACKAGE | The name of the package acts as | Mandatory. |
| primary along with the name of the |
|
| primary cluster. |
|
DATA_SENDER_PACKAGE** | The name of the package is in charge |
| of copying data from primary to |
| recovery along with the name of the |
| primary cluster. |
Optional: This is used only when a software based replication is used. This package runs only in the primary cluster.
RECOVERY_PACKAGE | The name of the package acts as | Mandatory. |
| recovery along with the name of the |
|
| recovery cluster. |
|
DATA_RECEIVER_PACKAGE** | The name of the package is in charge |
| of pulling data from the primary to |
| recovery along with the name of the |
| recovery cluster. |
Optional: This is required only when a software based replication is used. This package runs only in the recovery cluster.
REHEARSAL_PACKAGE | The name of the package acts as the |
| rehearsal package along with the |
| name of the recovery cluster. |
For Example: |
|
Optional: This is required only when the DR Rehearsal feature is used.
RECOVERY_GROUP_NAME rggroup1
PRIMARY_PACKAGE primary_cluster/primary_pkg RECOVERY_PACKAGE recovery_cluster/recovery_pkg
RECOVERY_GROUP_NAME rggroup2
PRIMARY_PACKAGE primary_cluster/primary_pkg1 DATA_SENDER_PACKAGE primary_cluster/data_sender1 RECOVERY_PACKAGE recovery_cluster/recovery_pkg1 DATA_RECEIVER_PACKAGE recovery_cluster/data_receiver1 REHEARSAL_PACKAGE recovery_cluster/rehearsal_pkg1
Creating a Continentalclusters configuration | 23 |
