HP Serviceguard Metrocluster manual Fence, Autorun, # cmcheckconf -P temp.config

•FENCE

Specify the fence level configured for the XPCA device group that is managed by this package.

•AUTO_RUN

Set the value of this parameter to no.

There are additional parameters available in the package configuration file. HP recommends that you retain the default values of these variables unless there is a specific business requirement to change them. For more information about the additional parameters, see “Package Attributes for Continentalcluster with Continuous Access for P9000 and XP” (page 88).

3.Validate the package configuration file.

# cmcheckconf -P temp.config

4.Apply the package configuration file.

# cmapplyconf -P temp.config

Configuring the primary and recovery packages as modular packages when using Continuous Access EVA

When using Continuous Access EVA replication in Continentalclusters, the primary and recovery packages must be created using the dts/cccaeva module. To use this module, Metrocluster with Continuous Access EVA must be installed on all the nodes in the Continentalclusters. If Metrocluster with Continuous Access EVA is not installed on all the nodes, then the following error message is displayed when cmmakepkg command is run.

The file /etc/cmcluster/modules/dts/cccaeva does not exist or read/search permission not set for a component of the path: No such file or directory

1 number of errors found in specified module files! Please fix the error(s) before re-running the command. cmmakepkg: Error encountered. Unable to create template file.

When configuring the modular packages using Continuous Access EVA, only the package configuration file must be edited. The Metrocluster environment file is automatically generated on all the nodes when the package configuration is applied in the cluster.

CAUTION: Do not delete the Metrocluster environment file that is generated in the package directory. This file is crucial for the startup of the package in a Continentalclusters.

To configure the primary and recovery packages as modular packages using Continuous Access

P6000 EVA with Continentalclusters as follows:

1.Run the following command to create a Continuous Access EVA modular package configuration file:

# cmmakepkg –m dts/cccaeva temp.config

NOTE: Continentalclusters is usually used with applications such as Apache. So, the application toolkit module must also be included when Continentalclusters is used in conjunction with an application.

For Example, when Continentalclusters is used in conjunction with the Apache toolkit, the Apache toolkit module and other required modules must also be included with the Continentalcluster module. Run the following command:

Configuring the Continentalclusters primary and recovery packages 17