Turning Auto Insert Notification On or Off

Auto Insert Notification runs a CD-ROM or DVD-ROM on insertion, but drains power and prevents system-initiated Suspend (Standby) and prevents system-initiated hibernation.

NOTE: The Auto Insert Notification prevents system-initiated (timeout) suspend/hibernation in Windows 95 and Windows NT 4.0.

Turn off Auto Insert Notification:

In Windows 95 or Windows 98 select StartÆSettingsÆ Control PanelÆSystemÆDevice ManagerÆCD-ROMÆProperties. Clear the CD-ROM Auto Insert Notification check box.

In Windows NT 4.0 select StartÆSettingsÆControl

PanelÆCompaq PowerÆBattery Conservation Settings tab. Clear the CD-ROM Auto Insert Notification check box.

To turn on auto insert notification, access the CD-ROM Auto Insert Notification check box as instructed above, then select the check box.

Conserving Battery Power

Battery Power Conservation Checklist

Exit modem applications and turn off local area network (LAN) connections when you are not using them.

Disconnect external equipment you are not using that is not connected to an external power source.

If you leave your work, initiate Suspend (Standby) or Hibernation or shut down the computer.

Remove PC Cards you are not using.

Use the Fn+F10 hotkeys to quickly raise and lower display brightness as you work.

Run the computer on external power while formatting a diskette.

Managing Power 5-17

Page 71
Image 71
HP V300 manual Conserving Battery Power, Turning Auto Insert Notification On or Off, Battery Power Conservation Checklist