Konica Minolta Network Printer manual Loading Paper in Tray 1

HOME

Maintenance & Supplies

Loading Paper (continued)

Loading Paper in Tray 1 and 2

When Thick or Thin is displayed on the tray key of the Basic Screen, be sure to load the specified paper; otherwise mishandled paper may occur.

When TAB is displayed on the tray key of the Basic Screen, see p. 8-7.

1Withdraw tray 1 or 2, and open the paper feed roller.

2Place paper on the tray with the curl side turning up.

Load size 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R or 5.5"x8.5" (user-adjustable) Do not stack paper above the thick red line.

3Move the green lever (located at the left side) of the rear paper guide to the edge of the

paper.

NOTE: Be sure that the paper guides are securely aligned to the paper; otherwise the machine cannot detect the correct paper size, or prints may not be punched in position.

4When paper is seated properly, close the paper feed roller.

5Push the tray back fully into the printer.

NOTE: Do not bump the tray into the main body; otherwise machine trouble may be caused.

Maintenance & Supplies 8-3