Konica Minolta Network Printer manual Home

HOME

Machine Information

Konica Force 65 Overview

The Force 65 Network Printing System provides high quality printing suitable for any IBM- compatible or Macintosh environment. The printer's main body engine works in conjunction with the new open architecture (NOA) of the print controller to provide a flexible and modular way of customizing the language interpreter, the I/O and communication, and the system control. NOA supports a modular based object oriented system software that enables you to use special software modules developed for enhancing printing capabilities and/or for adjusting the IP system to meet special requirements.

The built-in electronic recirculating document handler (ERDH) provides dual access capability, enabling the printer to receive a job while another job is printing or rasterizing. This timesaving system allows you to work with optimal efficiency even when the printer is working at peak capacity.

The advanced finishing system of the Force 65 provides you with the option of sending print jobs to the output tray face down and in correct order.

The Force 65 printer is perfect for any work environment.

•use it as a non-network printer by connecting it to your PC with standard serial or parallel port cabling.

•install the optional network interface card and use it as a standard network printer supporting NetWare, AppleTalk (EtherTalk) or TCP/IP.

•install the Force 65 as a high-end network printer in an AS 400/IBM Host Environment.

Highlights of the Force 65 include:

•65 ppm

•600 dpi

•duplex mode

•3 standard paper trays plus a Multi-sheet bypass tray

•LCT, Finisher and Punching/Z-Folding Unit

3-2 Machine Information