HOME
Key Operator Mode
Memory Switch Setting [13]
This function allows you to change the Memory Settings listed below. See pp.
SW No. | Item | Setting (default is underlined) |
No. 09: | Automatic tray switching | OFF/ ON |
No. 20: | Job offset operating | OFF/ ON |
No. 21: | Continuation print | OFF/ ON |
No. 22: | Key click sound | OFF/ ON |
No. 23: | 1 SHOT indication time | 3 seconds/ 5 seconds |
No. 24: Power save screen | Shut off mode/ Low power mode | |
No. 29: Arrow key change (Image Shift) | Decimal point off (1 STEP 1mm)/ Decimal point | |
|
| on (1 STEP 0.1mm) |
No. 33: Key click sound (No paper/JAM) | OFF/ 3 seconds/ 5 seconds/ 10 seconds | |
No. 37: Trimmer (STD/Non STD size) | STD size/ Non STD size | |
| (Function invalid) |
|
No. 39: Bookmark function | ON (It is cancel every JOB)/ ON (It is not cancel | |
|
| every JOB)/ OFF |
No. 44: Exit direction | Face down/ Face up | |
Key Operator Mode Screen 1 | Key Operator Mode Screen 2 | |
Memory Switch Setting Screen
