Konica Minolta Network Printer Loading Tabbed Sheets in Multi-Sheet Bypass Tray, ONE Finished SET

HOME

Maintenance & Supplies

Loading Paper (continued)

Loading Tabbed Sheets in Multi-Sheet Bypass Tray

Load offset tabbed sheets so that the tab extensions are on the right at the rear (not front) of the tray. The top sheet is designated face up as the first tab of the finished set. Subsequent offset tab sheets follow in sequence. The tab extension width should be 0.5" (12.5 mm) or less.

When loading tabbed sheets in the Multi-sheet bypass tray, be sure to specify the paper type as Tab paper on the Paper Type/Size Setting Screen; otherwise mishandled paper may occur.

Rear

Front

Example: 3 Tabbed sheets loaded in position for one finished set.

1st TAB

	1st TAB	Section 1	2nd TAB
Section 1		Introduction
	2nd TAB
Introduction
Printed
side			3rd TAB
	3rd TAB

ONE FINISHED SET

Example: 9 Tabbed sheets loaded in position for 3 finished sets.

Rear

Front

1st TABS

Section 1
Introduction	2nd TABS

Printed
side	3rd TABS

1st TAB

Section 1

Introduction

2nd TAB

Section 1	Section 1
Introduction	Introduction

3rd TAB

3 FINISHED SETS

8-8 Maintenance & Supplies