HOME
Key Operator Mode
Weekly Timer [9]
This function can be accessed only by the Key Operator after a unique
The Weekly Timer is a printer management function that shuts down power to the machine on a daily or hourly basis, and can be programmed specifically for lunch breaks, weekends and holidays, or any time the printer is not required.
In addition, Timer Interrupt can be enabled (with or without a password requirement) to allow temporary use of the machine during periods when power is shut down by the Timer function.
Conditions required to use the Weekly Timer
•The power plug is inserted into the socket.
•The power switch is turned on.
•The current date and time are correctly set.
If the Weekly Timer needs to be activated on your machine, contact your service representative.
The following Weekly Timer settings can be made.
[1]Weekly timer ON/OFF setting Enable and disable the Timer function.
[2]Timer Setting
Specify the times that the printer will turn ON and OFF for each day of the week or the entire week.
[3] Timer action ON/OFF Setting
Specify the working days of the machine by the Timer, for all Mondays through Sundays, and/or individually for each day of the specified month.
[4] Lunch hour off setting
Specify the lunch time interval during which the printer will turn off and on.
[5] Timer interrupt password set
Require Password entry for the Timer off function and establish the amount of usage time.
NOTES: 1 The time is set in terms of the 24 hour clock, where hour [1] is the first hour after midnight; and hour [24] is midnight. For example, 6 a.m. is 06:00 hours; 6 p.m. is 18:00 hours.
2 The [AUTO RESET] key is used to change numbers determined by the SET touch key.
