Konica Minolta Network Printer manual Timer Interrupt Password Setting

HOME

Key Operator Mode

Weekly Timer [9] (continued)

Timer Interrupt Password Setting [5]

Use this password setting mode to establish a 4-digit password requirement for using Timer Interrupt function. The default password of 0000 allows the timer function to be interrupted without the requirement for password entry.

Weekly Timer Setting Menu Screen Timer Interrupt Password Setting Screen

1Press [HELP] to display the Help Screen, then touch Key Operator Mode.

Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.)

2Touch [9] Weekly timer. Enter your 4-digit Weekly Timer master key code, then touch OK

to display the Weekly Timer Setting Menu Screen. (See note 2.)

NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.

2 If an invalid Weekly Timer master key code is entered, continue by entering the valid 4-digit code.

3Touch [5] Timer interrupt password set to display the Timer Interrupt Password Setting Screen.

4Use the touch screen keypad to enter a 4-digit password, and then touch OK to

complete the setting and return to the Weekly Timer Setting Menu Screen.

NOTE: When the password setting is 0000, Timer Interrupt can be used simply by turning the printer OFF, then ON. In this case, you will be asked to enter the duration of use (a period of time to turn the printer power on).

If other Weekly Timer setting changes are required, select the desired menu item, from [1]~[5].

5Touch RETURN to restore the Key Operator Mode Screen.

6Touch RETURN to return to the Basic Screen and perform printing operations.

9-30 Key Operator Mode