Secondary Sub tray Non-sort mode | Konica Minolta Network Printer

HOME

Safety Information

Finisher Capacity Requirements

CAUTION:

FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR MACHINE DAMAGE.

❒FINISHER PAPER CAPACITY

To prevent paper misfeed, do not exceed the paper capacity of the Finisher. FS-110/FS-210 Finisher paper weight: 16 lb ~ 24 lb

When the selected print quantity exceeds the maximum paper capacity, remove the printed sheets from the ﬁnisher while the paper is exiting.

Paper capacities below are stated for 20 lb bond unless otherwise indicated. This Finisher also accepts wide types of the regular sizes stated below.

Finisher FS-110/FS-210

Primary (Main) tray: Non-sort/Sort/Group mode 500 sheets (5.5"x8.5"R)

3,000 sheets (8.5"x11", 8.5"x11"R)(FS-110)

2,500 sheets (8.5"x11", 8.5"x11"R)(FS-210)

1,500 sheets (11"x17", 8.5"x14")

The Secondary (sub) tray can be unloaded while the Force 65 is running. Set production is not limited by the capacity of the Secondary (sub) tray.

Primary (Main) tray: Punch mode (machine with PK-110/120 only)

3,000 sheets (8.5"x11")

1,500 sheets (11"x17")

The Secondary (sub) tray can be unloaded while the Force 65 is running. Set production is not limited by the capacity of the Secondary (sub) tray.

Primary (Main) tray: Staple-Sort / Staple-Sort + Z-Folding mode 1,000 sheets* (11"x17" ~ 8.5"x11"/R)

*The maximum capacity varies according to the number of prints to be stapled. See p. 4-5.

When using Z-Folding mode with Staple-Sort mode, the maximum capacity varies according to the number of Z-folded sheet in one stapled set. See p. 4-8.