Konica Minolta Network Printer manual Parallel staples

HOME

Output Modes

Staple-Sort Mode Using Primary (Main) Tray

Use this mode when you want to offset and staple each printed set. Stapling position and number of staples (1 or 2) can be designated.

Each finished set will be offset from the next printed set.

With the Primary (main) tray initially selected, FS-110/210 outputs the printed sheets FACE DOWN in the proper order.

❒Stapled paper at 1 position: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11" (5.5"x8.5" is available in portrait orientation only.)

❒Stapled paper at 2 positions: only 8.5"x11" paper loaded with larger vertical dimension 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11" paper loaded with larger horizontal dimension

❒Paper capacity for 20 lb: 1,000 sheets (Variable according to the number of pages to be stapled. See p. 4-5 for details.)

❒Staple capacity: 50 sheets 20 lb (5.0 mm thick or less)

(Staple capacity is changeable, and may be set to 45, 40, or 35 by your service representative.)

❒Staple position: 1 oblique staple*; 2 parallel staples

*: Oblique staple may change to parallel staple when using some print sizes.

3	3
2	2
3	3
2	1
1
3	3
2	2
1	1

1 oblique staple 2 parallel staples

NOTE: Using excessively curled paper or some types of thin paper in Staple-sort mode may cause poor results in arrangement of the stapled sets.

Output Modes 6-7