HOME
Machine Information
Konica Force 65 Overview (continued)
Service Settings
Setting changes for the following functions can be made by your service representative.
Finisher-Paper Capacity
In the default condition, the Force 65 will produce unlimited sets. If required, your service representative can set the printer to stop printing when the number of prints exceeds specified capacity.
Key Operator Password
Your service representative can set a
After this setting is made, a Password Entry Screen will be displayed when Key Operator mode is selected from the Help Screen. The user or Key Operator will be required to enter the valid Key Operator password before accessing the Key Operator Mode Screen. It is recommended that the Key Operator password be noted and kept in a secure place in the event it is forgotten. Otherwise, you will be required to contact your service representative to obtain a password.
Weekly Timer
Your service representative can set a
After this setting is made, the Weekly Timer Master Key Code Screen will be displayed and will always require entry of the set Weekly timer master key code to access the Weekly Timer Setting Menu Screen.
Your service representative can set the weekly timer system to display the Weekly timer key on the Help Screen which enables you to view Weekly timer settings.
Staple Sheet Capacity
Staple capacity is changeable, and may be set to 45, 40, or 35 by your service representative.
Notice Message for ADD TONER/ PM CALL
Your service representative can set the printer message area to display “ADD TONER” when the toner supply is low, or “PM CALL” when preventive maintenance is required.
