Konica Minolta Network Printer manual How to Access the ECM Setting Mode

HOME

Key Operator Mode

ECM (Electronic Copy Monitor) Function Setting [4] (continued)

How to Access the ECM Setting Mode

Key Operator Mode Screen ECM Master Key Code Screen

ECM Setting Menu Screen

1Press [HELP] to display the Help Screen, then touch Key Operator Mode.

Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.)

If the Key Operator password is not valid, check with your service representative.

2Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays if a code is required.

3Use the keypad on the touch screen to enter your 8-digit ECM master key code, then touch OK to display the ECM Setting Menu Screen. (See note 2.)

4Select the desired ECM function, and make settings as required.

To exit the ECM mode, touch RETURN on ECM Setting Menu Screen.

5Touch RETURN on the Key Operator Mode Screen to return to the Basic Screen.

NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.

2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code. The ECM master key code can be set to less than 8 digits by the Memory switch setting of the Key Operator function.

Key Operator Mode 9-11