Lexmark 4600MFP Standard Bin Full, Bin name Full, Toner Low, Tray x Empty, Tray x Low, Waiting

Understanding MFP messages

Message	Meaning	Action
Standard Bin Full	The standard bin is full.	Remove the stack of print media from the standard
Bin [x] Full	x represents the number of the bin	output bin or from the specified bin to clear the
		message.
[bin name] Full	that is full.
		Note: These messages appear on the Menu Settings
	[bin name] specifies a previously
		Page also. See Menu Settings Page for more
	defined name for the bin, such as
		information.
	Mary’s bin, and it is full.
Toner Low	The toner cartridge is low on toner.	• The message clears automatically when the cover
	The Menu Settings Page shows the	or door over the toner cartridge is opened or if the
		MFP power is turned off and then on.
	level. It takes an unspecified amount
		• Replace the toner cartridge. If it is not replaced, the
	of time for the MFP to read the level
		MFP issues the message again when the door or
	of toner. Until the level is read, the
		cover is closed.
	MFP does not show the message.
Tray [x] Empty	x represents the number of the tray.	1 Remove the tray. The message clears.
	The tray has no print media installed.	2 Install print media in the tray according to the
		User’s Guide.
		3 Insert the tray.
Tray [x] Low	x specifies the number of the tray	Load print media into the specified tray to clear the
	that is low.	message.
Tray [x] Missing	x represents the number of the tray	Insert the tray to clear the message.
	missing from the MFP.
	The message is on the Menu
	Settings Page also.
Waiting	The MFP receives a page of data to	Press Stop. Touch Continue to print the contents of
	print but waits for an End of Job	the buffer.
	command, a Form Feed command,	Cancel the current job.
	or additional data.
		Wait for the message to clear.

Status messages

100