Using the MFP menus
Menu item | Purpose | Values and descriptions | |
Job Buffering | This menu item only appears when | Off* | Does not buffer print jobs to the hard |
| a formatted hard disk is installed. |
| disk. |
| Temporarily stores jobs on the MFP |
|
|
| On | Buffers print jobs to the hard disk. | |
| hard disk before printing. | ||
|
|
| |
| Note: Changing the Job Buffering | Auto | Buffers print jobs only if the MFP is |
| menu item automatically resets the |
| busy processing data from another |
| MFP. It is reset to configure |
| input port. |
| memory, and any permanent |
|
|
| resources, such as fonts or macros, |
|
|
| are lost. |
|
|
|
|
|
|
Serial Protocol | Selects the hardware and software | DTR* | Hardware handshaking. |
| handshaking values for the serial |
|
|
| DTR/DSR | Hardware handshaking. | |
| interface. | ||
|
|
|
|
|
| XON/XOFF | Software handshaking. |
|
|
|
|
|
| XON/XOFF/DTR | Combined hardware and software |
|
|
| handshaking. |
|
|
|
|
|
| XONXOFF/DTRDSR | Combined hardware and software |
|
|
| handshaking. |
|
|
|
|
Robust XON | Determines whether the MFP | Off* | The MFP waits to receive data from |
| communicates availability to the |
| the computer. |
| computer. |
|
|
| On | The MFP sends a continuous stream | |
| This menu item only applies to the | ||
|
| of XONs to the host computer to | |
| serial port if Serial Protocol is set to |
| |
|
| indicate that the serial port is ready to | |
| XON/XOFF. |
| |
|
| receive more data. | |
|
|
| |
|
|
|
|
Baud | Specifies the rate at which data can | 1200 |
|
| be received through the serial port. |
|
|
| 2400 |
| |
| Note: 138200, 172800, 230400, |
| |
|
|
| |
| and 345600 baud rates appear in | 4800 |
|
| the Standard Serial menu. These |
| |
|
|
| |
| values do not appear in the Serial | 9600* |
|
| Option 1, Serial Option 2, or Serial |
|
|
|
|
| |
| Option 3 menus. | 19200 |
|
|
|
|
|
|
| 38400 |
|
|
|
|
|
|
| 57600 |
|
|
|
|
|
|
| 115200 |
|
|
|
|
|
|
| 138200 |
|
|
|
|
|
|
| 172800 |
|
|
|
|
|
|
| 230400 |
|
|
|
|
|
|
| 345600 |
|
|
|
|
|
Data Bits | Specifies the number of data bits | 7 |
|
| that are sent in each transmission |
|
|
| 8* |
| |
| frame. |
| |
|
|
|
|
Parity | Sets the parity for serial input and | Even |
|
| output data frames. |
|
|
| Odd |
| |
|
|
| |
|
|
|
|
|
| None* |
|
|
|
|
|
|
| Ignore |
|
|
|
|
|
Network/Ports
41
