Lexmark 4600MFP manual Print Settings

Using the MFP menus

Menu item	Purpose	Values and descriptions
Base file name		text entry	The default value is the following word:
			image
			Note: There is a 53-character limit for the
			base file name. The following characters
			or symbols are invalid:
			* — asterisk
			: — colon
			? — question mark
			< — less than symbol
			> — greater than symbol
			— vertical bar
			A time stamp is added to the end of the
			base file name.
Custom Job	Allows for scanning of custom scan	On	To set to On, select the check box.
scanning	to USB jobs.	Off*	To set to Off, clear the check box.
	This is also known as Job Build.
	Custom Job is not supported on all
	models.
Background	Adjusts the amount of background	-4 to +4 (0*)	-4 sets Background Removal to off.
Removal	visible on a copy.		+4 sets Background Removal to the
			maximum allowed.
Contrast	Specifies the contrast used for the	0—5	Text default is 5.
	scan to USB job. The default is		The default is 0 for items other than text.
	dependent on the Content menu
	item. If the Content menu item is
	reset from the default setting, then
	the default for Contrast is reset,
	also.
Shadow Detail	Adjusts the amount of shadow	-4 to +4 (0*)	-4 preserves the least amount of shadow
	detail visible on a copy.		detail.
			+4 preserves the most shadow detail.
Scan edge to	Specifies if the original document is	Off*
edge	scanned edge-to-edge prior to	On
	sending the scan to USB job.

Print Settings

Print settings consist of the following menus. Click any of the menus for more information

Finishing Menu	PCL Emulation Menu
Quality Menu	PDF Menu
Utilities Menu	HTML Menu
Setup Menu	Image Menu
PostScript Menu

Settings

75