Understanding MFP messages
Message | Meaning | Action |
53 Unformatted flash | The MFP detects unformatted flash | Touch Continue to clear the message and |
detected | memory. | continue printing. The MFP continues with |
|
| normal operations except for flash operations. |
|
| Reformat the flash to allow flash operations. |
|
| If the error message reappears, the flash |
|
| memory may be defective and require |
|
| replacing. |
|
|
|
54 Network [x] software | The MFP cannot establish | • Touch Continue to clear the message and |
error | communications with a specified | continue printing. The job may not print |
| installed network port. x indicates the | correctly. |
| number of the specified port. | • The MFP disables attempts to communicate |
|
| through the network interface. No data may |
|
| be sent or received. |
|
| • Reset the MFP. |
|
| • Program new firmware for the network |
|
| interface. |
|
|
|
54 Serial option [x] | The MFP detects a serial error, such | • Make sure the serial link is set up correctly, |
error | as framing, parity, or overrun on the | and the appropriate cable is in use. |
| specified optional serial port. x is the | • Make sure the serial interface parameters |
| number of the optional serial port. | (protocol, baud, parity, and data bits) are set |
|
| correctly on the printer and host computer. |
|
| • Touch Continue to clear the message and |
|
| continue processing the print job; however |
|
| the print job may not print correctly. |
|
| • Turn the MFP off and then on to reset it. |
|
|
|
54 Standard network | The MFP firmware detects an | • Touch Continue to clear the message and |
software error | installed network port, but cannot | continue printing. The job may not print |
| establish communication with it. | correctly. |
|
| • The MFP disables attempts to communicate |
|
| through the network interface. No data may |
|
| be sent or received. |
|
| • Reset the MFP. |
|
| • Program new firmware for the network |
|
| interface. |
|
|
|
56 Parallel port [x] | A status request occurs over the | Touch Continue. The MFP discards any data |
disabled | parallel port, but the parallel port is | received on the parallel port. |
| disabled. | Touch Reset Active Bin to reset the active bin |
|
| |
|
| for a linked set of bins. |
|
|
|
56 Serial port [x] | The MFP receives data across a | Touch Continue. The MFP discards any data |
disabled | serial port, but the port is disabled. | received on the serial port. |
|
| Touch Reset Active Bin to change to another |
|
| linked bin. |
|
|
|
56 Standard parallel | The message appears when a status | • Touch Continue to clear the message. |
port disabled | is requested through the parallel port, | The MFP discards any data received through |
| but the port is disabled. | |
| the parallel port. | |
|
| |
|
| • Make sure the Parallel Buffer menu item is |
|
| not set to Disabled. |
|
|
|
56 Standard USB port | The MFP receives data through a | Touch Continue. The printer discards any data |
disabled | USB port, but the USB port is | received through the USB port. |
| disabled. | Make sure the USB Buffer menu item is not set |
|
| |
|
| to Disabled. |
|
| Touch Reset Active Bin to change to another |
|
| linked bin. |
|
|
|
Attendance messages
112