Lexmark 4600MFP manual Ram

Using the MFP menus

Menu item	Purpose	Values and descriptions
Printer Language	Specifies the default printer	PCL Emulation	PCL emulation–Uses a PCL interpreter for
	language used to	PS Emulation*	incoming host communications.
	communicate data from the		PostScript emulation–Uses a PS interpreter
	computer to the MFP.
			for incoming host communications.
	Note: This menu item is not
	available from the control
	panel. It is only available on
	the MFP Embedded Web
	Server. Setting a printer
	language as the default does
	not prevent a software
	application from sending print
	jobs that use the other
	language.
Print Area	Modifies the logical and	Normal*	Note: The Whole Page setting only affects
	physical printable area.	Whole Page	pages printed using PCL 5 interpreter. This
	Note: This menu item is not		setting has no effect on pages printed using
			the PCL XL or PostScript interpreters. If
	available from the control
			attempting to print any data in the non-
	panel. It is only available on
			printable area defined by Normal Print Area,
	the MFP Embedded Web
			the MFP clips the image at the boundary
	Server.
			defined by the Normal defined printable area.
Download Target	Specifies the storage location	RAM*	All downloaded resources are automatically
	for downloaded resources.		stored in printer memory (RAM).
	Storing downloaded
		Flash	All downloaded resources are automatically
	resources in flash memory or
			stored in flash memory.
	on a hard disk is permanent
			Note: Flash appears as a menu item if a
	storage rather than the
	temporary storage that RAM		formatted, nondefective optional flash
	provides. The resources		memory card which is not Write or Read/Write
	remain in the flash memory or		password protected is installed.
	on the hard disk even when
		Disk	All downloaded resources are automatically
	the MFP is turned off.
	Note: This menu item is not		stored on the hard disk.
			Note: Disk appears as a menu item if a
	available from the control
	panel. It is only available on		formatted, nondefective hard disk that is not
	the MFP Embedded Web		Write or Read/Write password protected is
	Server.		installed.
Job Accounting	Specifies to store or not store	Off*	The MFP does not store job statistics on the
	statistical information about		hard disk.
	the most recent print jobs on
		On	The MFP stores job statistics for the most
	the hard disk. The statistics
	include whether the job		recent print jobs.
	printed with or without errors,
	the print time, the job size (in
	bytes), the requested print
	media size and type, the total
	number of printed pages, and
	the number of copies
	requested.
	Note: This menu item is not
	available from the control
	panel. It is only available on
	the MFP Embedded Web
	Server.

Settings

49