Lexmark 4600MFP manual Bind on page 76 for more, Pabx

Using the MFP menus

Menu item	Purpose	Values and descriptions
Duplex	Sets duplex scanning (two-sided	Off*	The fax job is not set for duplex
	scanning) either on or off for outgoing		printing.
	fax jobs.
		Long edge	The long end of the page (left edge is
			for portrait orientation and top edge for
			landscape orientation). See Duplex
			Bind on page 76 for more
			information.
		Short edge	The short edge of the page (top edge
			for portrait orientation and left edge for
			landscape orientation). See Duplex
			Bind on page 76 for more
			information.
Content	Specifies the type of content contained	Text*	The fax job contains mostly text or line
	in the fax job.		art.
		Text/Photo	The fax job contains a mixture of text
			and images.
		Photo	The fax job contains only images.
Darkness	Specifies the level of darkness for the	1—9 (5*)	A graphic representation depicts the
	fax job.		values. As the right or left scroll
			button is touched, the asterisk moves
			back and forth on the line. 1 is next to
			the - and 9 is next to the +. As shown,
			5 is the current value.
				-	+
Dial Prefix	A numeric entry field is provided to	Number string	The entry field is limited to 16
	enter numbers. The previously entered		characters. Text entry characters are
	numbers are shown.		limited to:
	The dial prefix could be a country code		0—9, (, ), ., +, -, and a space.
	or a code businesses use to dial an
	outside line.
Automatic	Specifies the number of times the MFP	0—9 (5*)
Redial	automatically tries to send the fax job
	again by resubmitting the Fax To
	number.
Redial	Select a range in minutes for the	1—200 (3*)
Frequency	number of redials to occur in that time
	span.
Behind a	Enables or disables switchboard blind	Yes	Do not wait for a dial tone.
PABX	dialing without a dial tone.
		No*	Wait for a dial tone.
Enable ECM	Enables Error Correction Mode for fax	Yes*	ECM is enabled.
	jobs, which makes faxing more
		No	ECM is disabled.
	reliable.
Enable Fax	Allows sending faxes by scanning at	On*	Fax scans are enabled.
Scans	the MFP.
		Off	Fax scans are disabled.
Driver to Fax	Allows driver to fax jobs to be sent by	On*	Driver to fax jobs can be sent.
	the MFP.
		Off	Driver to fax jobs cannot be sent.
			Driver to fax jobs are treated like
			PostScript jobs.

Settings

59