2 Understanding MFP messages
Messages appear on the MFP control panel describing the current state of the MFP and indicating possible MFP problems requiring intervention.
Status messages
Status messages provide information on the status of the MFP.
Message | Meaning | Action | |
Bin [x] Full | x represents the number of the | Remove print media from the bins. The message | |
| output bin that is full when the MFP | clears once the output level of the linked bins is no | |
| bins are linked. | longer full. | |
|
| Note: The message appears on the Menu Settings | |
|
| Page also. See Menu Settings Page for more | |
|
| information. | |
|
|
| |
Busy | The MFP is busy receiving, | Press Stop to access the job queue. | |
| processing, or printing data. |
| |
|
|
| |
Flushing Buffer | The MFP flushes corrupted data and |
| |
| discards the current print job. |
| |
|
|
| |
Hex Trace | The MFP is in Hex Trace mode. | Exit Hex Trace to print jobs normally. To exit Hex | |
| Hex Trace isolates the source of a | Trace, unplug the MFP. | |
|
| ||
| print job problem. When Hex Trace |
| |
| is active, all data sent to the MFP |
| |
| prints in hexadecimal and character |
| |
| representation. |
| |
|
|
| |
[linked set bin | The linked set of bins with a | Remove print media from the bins. The message | |
name] Full | previously defined name is full. | clears once the output level of the linked bins is no | |
|
| longer full. | |
|
| Note: The message appears on the Menu Settings | |
|
| Page also. See Menu Settings Page for more | |
|
| information. | |
|
|
| |
Maintenance | The MFP maintenance counter has | Replace the maintenance items. If necessary, reset | |
| exceeded its limit, so the MFP | the MFP maintenance counter. | |
| requires maintenance. |
| |
|
|
| |
Network | A network interface is the active | Wait for the message to clear. | |
Network [x] | communication link. | Notes: | |
Network [x], [y] |
| ||
| • The current interface appears on the Menu Settings | ||
|
| ||
|
| ||
Parallel | A parallel interface is the active | Page. Interfaces shown without an x or y means | |
Parallel [x] | communication link. | the active host interface is a standard interface. | |
|
| • x indicates the active interface is connected to the | |
Serial [x] | A serial interface is the active | ||
MFP through PCI connector x. | |||
| communication link. | • x, y indicates the active interface is connected to | |
USB | The MFP is processing data through | the MFP through channel y on PCI connector x, or | |
that x equals 0 on the standard network interface. | |||
USB [x] | the specified USB port. | ||
| |||
|
|
| |
[PJL RDYMSG] | This is the Printer Job Language |
| |
| (PJL) Ready message. |
| |
|
|
|
Understanding MFP messages
98