Linksys SPA9000 manual Set Primary DNS 161 Enter the IP address

IP Telephony System

Interactive Voice Response Menu

Action	Command	Choices	Description
	(press these
	keys on the
	telephone)
Set Primary DNS	161	Enter the IP address	First, set the Internet Connection Type
Server IP Address		using numbers on the	to static IP address; otherwise, you
		telephone keypad. Use	will hear, “Invalid Option,” if you try to
		the * (star) key when	set the IP address of the primary DNS
		entering a decimal point.	server.
Set the Mode	201	Press 0 to select the	Use the router/NAT mode when the
		router/NAT mode.	Internet phones are on the Local Area
		Press 1 to select the	Network (LAN) side.
		bridge/switch mode.
			Use the bridge/switch mode when the
			Internet phones are on the Wide Area
			Network (WAN) side.
Configure	72255		Refer to the “Configuring the
Auto-Attendant			Auto-Attendant Messages” section at
Messages			the end of this chapter.
Enable/Disable WAN	7932	Press 1 to enable.	Use this setting to enable or disable
Access to the		Press 0 to disable.	WAN access to the Web-based Utility.
Web-based Utility			(This Utility lets you configure the
			System.)
Manual Reboot	732668		After you hear, “Option successful,”
			hang up the phone. The System will
			automatically reboot.
Factory Reset	73738	Press 1 to confirm.	If necessary, enter the password. The
		Press * (star) to cancel.	System will request confirmation;
			enter 1 to confirm. You will hear,
			“Option successful.” Hang up the
			phone. The System will reboot, and all
			settings will be reset to their factory
			default settings.

Chapter 5: Using the Interactive Voice Response Menu

Using the Interactive Voice Response Menu

NOTE: This feature may be protected by a password available only from your ITSP.

If you need to enter a password, refer to the following section, “Entering a Password.”

17

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560