Linksys SPA9000 manual Voice SIP Screen PBX Parameters

IP Telephony System

Insert VIA received. This lets you insert the received parameter into the VIA header of SIP responses if the received-from IP and VIA sent-by IP values differ. Select yes or no from the drop-down menu. The default is no.

Insert VIA rport. This feature lets you insert the rport parameter into the VIA header of SIP responses if the received-from port and VIA sent-by port numbers differ. Select yes or no from the drop-down menu. The default is no.

Substitute VIA Addr. This feature lets you use NAT-mapped IP:port values in the VIA header. Select yes or no from the drop-down menu. The default is no.

Send Resp To Src Port. This feature lets you send responses to the request source port instead of the VIA sent- by port. Select yes or no from the drop-down menu. The default is no.

STUN Enable. This feature lets you use STUN to discover NAT mapping. Select yes or no from the drop-down menu. The default is no.

STUN Test Enable. If the STUN Enable feature is enabled and a valid STUN server is available, then the System can perform a NAT type discovery operation when it powers on. It will contact the configured STUN server, and the result of the discovery will be reported in a Warning header in all subsequent REGISTER requests. If the System detects symmetric NAT or a symmetric firewall, NAT mapping will be disabled.

The STUN Test Enable feature lets you use the STUN test. Select yes or no from the drop-down menu. The default is no.

STUN Server. Enter the IP address of the STUN server to contact for NAT mapping discovery.

EXT IP. Enter the external IP address to substitute for the actual IP address of the System in all outgoing SIP messages. If 0.0.0.0 is specified, then no IP address substitution will be performed.

EXT RTP Port Min. This is the external port mapping number of the RTP Port Min. number. If this value is not zero, then the RTP port number in all outgoing SIP messages will be substituted for the corresponding port value in the external RTP port range.

NAT Keep Alive Intvl. This is the interval between NAT-mapping, keep alive messages. The default is 15.

PBX Parameters

Proxy Network Interface. This tells the System how the clients (usually phones) are connected. Select LAN or WAN. The default is WAN.

Proxy Listen Port. This is the port used by the System when it listens for client messages at the selected interface. The default is 6060.

Chapter 6: Using the Web-based Utility

The Voice Tab

Figure 6-20: Voice - SIP Screen - PBX Parameters

39

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560