Linksys SPA9000 manual Voice Regional Screen Distinctive Ring Patterns

IP Telephony System

SIT2 Tone. This is an alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 914@-16,1371@-16,1777@- 16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0).

SIT3 Tone. This is an alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 914@-16,1371@-16,1777@- 16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0).

SIT4 Tone. This is an alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 985@-16,1371@-16,1777@- 16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0).

MWI Dial Tone. This tone is played instead of the Dial Tone when there are unheard messages in the caller’s mailbox. The default is 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2).

Cfwd Dial Tone. This tone is played when all calls are forwarded. The default is 350@-19,440@-19;2(.2/.2/ 1+2);10(*/0/1+2).

Holding Tone. This lets the local caller know that the far end has placed the call on hold. The default is 600@- 19*(.1/.1/1,.1/.1/1,.1/9.5/1).

Conference Tone. This is played to all parties when a three-way conference call is in progress. The default is 350@-19;20(.1/.1/1,.1/9.7/1).

Secure Call Indication Tone. This is played when a call has been successfully switched to secure mode. It should be played only for a short while, less than 30 seconds, and at a reduced level, less than -19 dBm, so it will not interfere with the conversation. The default is 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2).

Feature Invocation Tone. This is played when a feature is implemented. The default is 350@-16;*(.1/.1/1).

Distinctive Ring Patterns

Ring1 Cadence. This is the cadence script for distinctive ring 1. The default is 60(2/4).

Ring2 Cadence. This is the cadence script for distinctive ring 2. The default is 60(.3/.2,1/.2,.3/4).

Ring3 Cadence. This is the cadence script for distinctive ring 3. The default is 60(.8/.4,.8/4).

Ring4 Cadence. This is the cadence script for distinctive ring 4. The default is 60(.4/.2,.3/.2,.8/4).

Ring5 Cadence. This is the cadence script for distinctive ring 5. The default is 60(.2/.2,.2/.2,.2/.2,1/4).

Chapter 6: Using the Web-based Utility

The Voice Tab

Figure 6-27: Voice - Regional Screen - Distinctive Ring

Patterns

49

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560