Linksys SPA9000 manual MAC Clone Settings, Remote Management, QOS Settings

IP Telephony System

DNS Server Order. Select the order in which the DNS servers should be used: Manual; Manual, DHCP; or DHCP,

Manual. The default is Manual.

DNS Query Mode. Select how the DNS servers should be queried: Parallel or Sequential. The default is

Parallel.

Primary NTP Server. Enter the IP address of the primary NTP server, which the System uses to keep the date and time current.

Secondary NTP Server (optional). Enter the IP address of the secondary NTP server.

MAC Clone Settings

Enable MAC Clone Service. Select whether you want to clone a MAC address onto the System, yes or no. The default is no.

Cloned MAC Address. Enter the MAC address you want to clone.

Remote Management

Enable WAN Web Server. This feature lets you enable or disable access to the Web-based Utility from the WAN side. Select yes or no from the drop-down menu. The default is no.

WAN Web Server Port. Enter the port number used to access the Utility from the WAN side. The default is 80.

QOS Settings

QOS QDisc. QoS prioritizes voice communications when different types of traffic are competing for bandwidth.

Select the method you want to use: NONE, CBQ, or TBF. The default is NONE.

Maximum Uplink Speed. Enter the maximum upload speed of your Internet connection. The default is 128Kbps.

VLAN (Virtual Local Area Network) Settings

Enable VLAN. VLAN (802.1Q) settings let you use the System in a virtual LAN environment. Select yes or no from the drop-down menu. The default is no.

VLAN ID. Enter the ID number used by the System. The default is 1.

When you have finished making changes, click the Submit All Changes button to save the changes, or click the

Undo All Changes button to undo your changes.

Chapter 6: Using the Web-based Utility	28
The Router Tab

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560