Voice Algorithms, Law and mµ-law, 729 a | Linksys SPA9000 specs

IP Telephony System
	Voice Algorithms:
	G.711 (A-law and mµ-law)
	G.726 (16/24/32/40 kbps)
	G.729 A
	G.723.1 (6.3 kbps, 5.3 kbps)
	Dynamic Payload Support
	Adjustable Audio Frames Per Packet
	DTMF: In-band & Out-of-Band (RFC 2833) (SIP INFO)
	Flexible Dial Plan Support with Inter-Digit Timers
	IP Address / URI Dialing Support
	Call Progress Tone Generation
	Jitter Buffer - Adaptive
	Frame Loss Concealment
	VAD - Voice Activity Detection w/ Silence Suppression
	Attenuation / Gain Adjustments
	MWI - Message Waiting Indicator Tones
	VMWI - Via NOTIFY, SUBSCRIBE
	Caller ID Support (Name & Number)
Security	Password Protected System Reset to Factory Default
	Password Protected Admin and User Access Authority
	HTTPS with Factory Installed Client Certificate
	HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
	Up to 256-bit AES Encryption
Provisioning,
Administration &
Maintenance	Web Browser Administration & Configuration via Integral Web Server
	Telephone Key Pad Configuration of Select Networking Parameters via IVR
	Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
	Asynchronous Notification of Upgrade Availability via NOTIFY
	Non-intrusive, In-Service Upgrades
	Report Generation & Event Logging
Appendix H: Specifications	111

VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560

Image 118

Linksys SPA9000 manual Voice Algorithms, Law and mµ-law, 726 16/24/32/40 kbps, 729 a, 723.1 6.3 kbps, 5.3 kbps

Contents

IP Telephony How to Use this Guide Copyright and Trademarks Table of Contents Appendix D New Music for the Music-on-Hold Feature Appendix a TroubleshootingAppendix B Configuring the Nighttime Auto-Attendant Ethernet Adapter 102 List of Figures A Scenario for the IP Telephony System 17 Voice SIP Screen RTP Parameters Screen Dial Plan Screen NAT SettingsScreen Proxy and Registration Introduction Welcome What’s in this Guide? IP Telephony System What Does the IP Telephony System Do? Applications for the IP Telephony SystemTypical Scenario What if I Keep My Traditional Phone Service? What Kind of Switch Should I Use?What Kind of Router Should I Use? Getting to Know the IP Telephony System Phone 1/2 Front Panel Getting Started Overview Before You Begin Connect and Configure the System Instructions for Installing the IP Telephony SystemInternal Calls Voice SIP Screen PBX Parameters Connect the Internet Phones External Calls Voice Line 1 Screen Configuring the Auto-Attendant Receiving and Handling External Phone Calls Accessing the Interactive Voice Response Menu Using the Interactive Voice Response MenuOverview Interactive Voice Response Menu Not press any other keys until you Check Primary DNS 160 Set Primary DNS 161 Enter the IP address Auto-Attendant Options Entering a Password Configuring the Settings for Your Internet Phone Service Prompt ID Default Audio Message Configuring the Auto-Attendant MessagesAuto-Attendant Messages To Delete To RecordTo Review To Exit Router Using the Web-based UtilityVoice PBX Status Screen How to Access the Web-based UtilityRegistration Parking Lot Line 1 Calls Product Information Router TabRouter Status Screen System Status Packet a unit of data sent over a network Static IP Settings Router WAN Setup ScreenInternet Connection Settings Pppoe Settings Vlan Virtual Local Area Network Settings MAC Clone SettingsQOS Settings Remote Management LAN Network Settings Router LAN Setup ScreenStatic Dhcp Lease Settings Router Application Screen Port Forwarding SettingsDMZ Settings System Reserved Ports Range Voice Info Screen Voice TabFXS 1/2 Status 10 Voice Info Screen FXS Status Line 1/2/3/4 Status Auto Attendant Prompt Status Miscellaneous Settings System ConfigurationVoice System Screen Voice SIP Screen SIP Parameters SIP Timer Values sec RTP Parameters Response Status Code HandlingSDP Payload Types NAT Support Parameters 19 Voice SIP Screen NAT Support Parameters PBX Parameters 20 Voice SIP Screen PBX Parameters IP Telephony System IP Telephony System Auto Attendant Parameters 21 Voice SIP Screen Auto Attendant Parameters Hd for holiday, which does not have to include the year PBX Phone Parameters 22 Voice SIP Screen PBX Phone Parameters Configuration Profile Voice Provisioning Screen Firmware Upgrade 24 Voice Provisioning Screen Firmware Upgrade General Purpose Parameters 25 Voice Provisioning Screen General Purpose Parameters Voice Regional Screen Call Progress Tones Distinctive Ring Patterns 27 Voice Regional Screen Distinctive Ring Patterns Distinctive Call Waiting Tone Patterns Distinctive Ring/CWT Pattern Names Control Timer Values sec Ring and Call Waiting Tone Spec Vertical Service Activation Codes 32 Voice Regional Screen Vertical Service Activation Codes IP Telephony System IP Telephony System Vertical Service Announcement Codes Outbound Call Codec Selection Codes Miscellaneous 35 Voice Regional Screen Miscellaneous IP Telephony System IP Telephony System SIP Settings Network SettingsVoice FXS 1/2 Screen Subscriber Information 38 Voice FXS 1 Screen Subscriber Information Dial Plan Call Feature SettingsStreaming Audio Server SAS Audio Configuration Is yes IP Telephony System FXS Port Polarity Configuration 43 Voice FXS 1 Screen FXS Port Polarity Configuration 44 Voice Line 1 Screen Network Settings Voice Line 1/2/3/4 Screen 46 Voice Line 1 Screen Subscriber Information Hunt=algointervalmax NAT Settings Proxy and Registration IP Telephony System Appendix a Troubleshooting Common Problems and Solutions Enter http//Internet IP address of the System For Windows 98 and Millennium Need to set a static IP address on a PC For Windows For Windows XP For Windows 98 and Millennium IP Telephony System Am not able to access the System’s Web-based Utility Setup TCP Enable Application Starting Protocol IP Address Ending Ports For Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higher Frequently Asked Questions How do I make a phone call? How can I block corrupted FTP downloads? Is the System cross-platform compatible? Instructions for Setting Up the Nighttime Auto-Attendant Appendix B Configuring the Nighttime Auto-AttendantDescription of the Auto-Attendant Recording a New Prompt Figure B-1 Auto-Attendant Message Options Configuring the Auto-Attendant Settings Figure B-2 Voice SIP Screen Auto Attendant Dialplan src=dp1/ match Configuring Dial Plans Dial Plan Entries IP Telephony System Configuring Dial Plans for the Auto-Attendant Auto-Attendant Dial Plans Internal Dial Plan Parameters of the Auto-Attendant FeaturePrompts for the Auto-Attendant Customizing the Auto-Attendant Default Auto-Attendant PromptsAA Scripts Parameters and XML Scripting Auto-Attendant XML Instructions Set Instruction Description Syntax and Examples Case input= Additional Parameters for Customization Additional Auto-Attendant Configuration ParametersParameter Description Type Example of a Typical Auto-Attendant Setup Format Start=hhmmssend=hhmmss Configuration Parameters for the Example Parameter Value Case input=1 Case Default Appendix D New Music for the Music-on-Hold Feature Instructions for Configuring the IP Telephony System Instructions for Converting the Music File 101 Windows 98 or Me Instructions Windows 2000 or XP Instructions For the Router’s Web-based Utility Figure E-4 MAC Address Clone Shared Resources Appendix F Windows HelpNetwork Neighborhood/My Network Places Appendix G Glossary 105 106 107 108 109 Appendix H Specifications Attenuation / Gain Adjustments Adjustable Audio Frames Per PacketFlexible Dial Plan Support with Inter-Digit Timers MWI Message Waiting Indicator Tones Stats in BYE Message Syslog & Debug Server Records Per Line ConfigurablePower, Ethernet, Phone 1/2 LEDs Physical Interfaces Environmental Appendix I Warranty Information Limited Warranty Appendix J Regulatory Information FCC Statement 116 117 118 119 120 Linksys Internet Telephony Service Provider ItspAppendix K Contact Information For support, contact your Itsp