Workflow Builder

Copy Count Divisor examples

The following examples illustrate various uses of the Copy Count

Divisor:

Example 1: Original quantity is 20 with 2-up; actual copies =10

1.The user sets the Copy Count Divisor switch to On.

2.The user creates a workflow with the following nodes:

Imposition (2up; Always use these settings is set);

Print (Always use these settings is not set)

3.User submits a job with an XPIF ticket: Copies: 20

4.The job successfully goes through the Imposition node.

5.The job prints 10 actual copies of the imposed document.

Example 2: Original quantity is 20 with 2-up + 2-up; actual copies = 5

1.The user sets the Copy Count Divisor switch to On.

2.The user creates a workflow with the following nodes:

Imposition (2up; Always use these settings is set)

Imposition (2up; Always use these settings is set)

Print (Always use these settings is not set)

3.User submits a job with an XPIF ticket: Copies: 20

4.The job successfully goes through the two Imposition nodes.

5.The job prints 5 actual copies of the imposed document.

Example 3: Original quantity is 20 with 2-up; observe changes to Print quantity settings

1.The user sets the Copy Count Divisor switch to On.

2.The user creates a workflow with the following nodes:

Review

Imposition (2up; Always use these settings is set)

Review

Print (Always use these settings is not set)

3.User submits a job with an XPIF ticket: Copies: 20

4.At the first Review the user opens the Copy Count Dialog. They will see: Quantity (original document):20

5.At the first Review the user looks at the Print task setting. They will see: Quantity: 20

2-142

FreeFlow Process Manager Operator and Administrator Guide

Page 194
Image 194
Xerox 701P47169 manual Copy Count Divisor examples, Job prints 10 actual copies of the imposed document