Workflow Builder
To configure Imposition settings - Crop Marks tab
The Crop Marks tab includes options that allow you to print guide or “cut” marks that define the edges of multiple pages of a job printed on larger paper stock. You can:
•Define the size and color of the crop marks.
•Define the sheet faces to which to apply the crop marks for simplex and duplex jobs.
1.
2.If Preps is detected on the computer, the initial Imposition Settings dialog displays. Select [Specify imposition settings], and select [OK] to close the window and display the Imposition Settings dialog.
If Preps is not detected on the computer, the standard Imposition Settings dialog displays.
3.In the Imposition Settings dialog, select the Crop Marks tab.
4.In the Crop mark box window, select from the following:
•[Media Sheet] to define the crop margin relative to the sheet regardless of imposition job type. Range is:
–0 to remaining width of paper stock for Left and Right controls.
–0 to remaining height of paper stock for Top and Bottom controls.
•[Media Cell] to define the crop margin relative to each cell on the sheet. Range is:
–0 to remaining width of cell for Left and Right controls.
–0 to remaining height of cell for Top and Bottom controls.
•[Cell Cluster] to define the crop margin relative to each cell cluster on the sheet.
For more information about clustering, see Guidelines for Cell Clustering.
•[PDF Crop Box] to define the boundary for the contents of the page when it is displayed or printed.
•[PDF Trim Box] to define the finished dimensions of the page after trimming.
FreeFlow Process Manager Operator and Administrator Guide |
